![]() A lot of people have problems with bad phone screens, and some iphone 7 users complain that their cell phone screens are damaged, and it's expensive to get to the repair shop, Maybe we should prepare some practical tools for their own iphone 7 repair, it will save a lot of money, not to the mobile phone repair shop to repair, now, VIP Pro Shop Team will offer some top guide for repair iphone 7 Screen issue. Recommended DIY - This Tools You Needed:
Before beginning, heat up the device’s interior adhesive strips with a dehydrator, heat gun, or heat mat. Heat guns are the quickest, but use caution as it can be easy to overdo it and damage the device. Open the iPhone 7 Screen: Step 1: Unscrew the two pentalobe screws on the bottom edge of the phone on either side of the lightning port. Step 2: Use the metal spudger to slowly and carefully separate the screen of the iPhone from the body. Start on the bottom edge of the device and proceed slowly. Step 3: Continue using the metal spudger or use playing cards or guitar picks to gently separate the adhesive up the sides and top. Don’t push too deeply towards the center of the device. Step 4:The left side of the screen will open off the body; like a book opened from the back cover. The iphone flex cable connecting the screen to the battery will still be attached so open it carefully. Disconnect the Cables: Step 1: A silver EMI shield on the mid-right side of the phone needs to be removed. It is held in place by four tri-point screws. Step 2: After removing the shield, use a spudger to disconnect the battery from the logic board. Step 3: Use the spudger to disconnect the display connector flex cable. Step 4: Remove the two Philips head iphone 7 screws on the shield over the front panel sensor assembly connector. It is the silver shield near the top of the phone with the flex cable coming out of the bottom. Step 5: With your spudger, disconnect the black front panel sensor assembly connector cable from the logic board. It is the one that connects the screen to the body. Step 6:You can now remove the LCD assembly of the iPhone 7 from the body. Remove the Front Camera and Earpiece: Step 1: we will remove the three Phillips head screws that hold the silver earpiece bracket on the top of the LCD assembly. Step 2: Pull the front camera up and out of the way with your spudger or tweezers. Remove the two Phillips head screws attached to the earpiece speaker. You can now also remove the earpiece speaker. Step 3: Use your spudger to remove the ambient light sensor and proximity sensor. This is a thin cable that is easy to tear so use caution. Remove the Touch ID/Home Button: Step 1: Remove the four pentalobe screws holding the touch ID/home button bracket. Step 2: Work your way around the side brackets on the both sides of the assembly, unscrewing all 6 tri-point screws. Step 3: Peel the large LCD shield away, starting from the top. Step 4: Use your spudger to disconnect the home button cable connector. Step 5: Disconnect the underlying connection with caution. Step 6: Pry the adhesive holding the touch ID/home button to the back of the digitizer. Step 7: The home button is now unattached and can be removed but pushing it forward through the front of the screen. Tips: For iPhone 7 Replacement Parts, or if you need some professional repair skilled, you want to consult, please check here
0 Comments
Leave a Reply. |
Authorvipprogrammer.com, on-line exporter featuring China Archives
January 2018
Categories |